RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 07-15-2019, 11:48 AM   #1
Junior Member
Join Date: Aug 2017
Posts: 14
Generator slide latch handle

I have a 2006 Monaco Diplomat. The handle/latch assembly for the generator slide has always been a bit difficult to operate. I have lubed everything and checked adjustment, which made it a bit better. While looking it over I noticed that the handle assembly above the license plate seemed to have an issue. Some of the moving parts don't seem to be working together the way they should. Instead of pushing on a certain part when you operate it, they are just moving past them and not operating the latch. I am trying to source a new handle assembly. I have search on this forum and online and have not found much info on the handle assembly, only the latches themselves. Any help with repairing this unit or finding a replacement would be greatly appreciated.

R-racer is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-15-2019, 03:20 PM   #2
Senior Member
Join Date: Oct 2016
Posts: 993
HI R-racer; Yes, know what you are talking about. Took a while to get everything adjusted and lubed on my 01 Windsor. Mine works fine now. If you have questions about the handle I would contact TriMark. They have a contact section on their web site. Their handles are used on a lot of RV's. Hope they can help with your question and good luck!

8.3Oilbuner is offline   Reply With Quote
Old 07-17-2019, 05:37 AM   #3
Junior Member
Join Date: Aug 2017
Posts: 14
Thanks very much for the info! I will check that out for sure! I am hoping that maybe I can repair the existing latch. I am hoping that maybe someone on here has had a similar issue and can let me know what they did.
R-racer is offline   Reply With Quote

generator, slide

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Discovery: 1/2 Bathroom Door Handle Hits Fridge Door Handle Dippytwo Fleetwood Owner's Forum 7 08-04-2019 07:16 AM
18 Bay/Cargo Door Handle change to Chrome 19 Handle? 18Anthem Entegra Owner's Forum 26 03-04-2019 01:58 PM
Entry Handle Light Tube/Grab Handle-Exterior airspeed Monaco Owner's Forum 8 06-20-2015 01:32 PM
Outside Driver Door Latch/Handle Replacement JFNM Fleetwood Owner's Forum 5 06-09-2014 10:22 AM
Need new front door latch/handle 1995 Fleetwood Southwind stevenstoli Fleetwood Owner's Forum 3 02-23-2013 06:59 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 03:02 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.