We purchased a 2007 Monaco Camelot and we would like to program the keyless entry. The manual tells us to change the code we need the original code.Our dealer has not been able to provide that for us. Any ideas?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Private Message windsorbill or myself, if you have a Trimark.
We're not going to put the code to get into the system on the internet, for obvious reasons.
__________________
Ben & Sharon
2008 43' Holiday Rambler Scepter PDQ
Thanks everyone- we took our coach to Cummins today- we also have a overheating problem to figure out. I will check on the type when we get it back and then we will see.
Open the front electronics/fuse/breaker door for the 12V power distribution. Mine is on driver side in front of wheel. There is a code label on the inside of this compartment.
The outdoor panel code I have for my 2007 TS does not work. ( I forgot what the number was and think I may have 'locked it out'). Is there any way to rest it to factory settings or change it without taking it to a repair shop?