Hydraulic jack control module

[jsmmonaco]

07 knight 40 skt.....diagnosed leveling jack issue to the control module located somewhere between touch pad in coach and jack pump.....but we have not found exactly where the module is located......anyone know?......thanks

[l1v3fr33ord1]

jsmmonaco-

While we're waiting for someone who knows the answer to show up, you may want to open your storage compartments and look up at the "ceiling" of each. Start with the compartments nearest the pump and work towards either end. It may be a few feet in from the edge of the coach.

[nodine]

Originally Posted by l1v3fr33ord1

jsmmonaco-

While we're waiting for someone who knows the answer to show up, you may want to open your storage compartments and look up at the "ceiling" of each. Start with the compartments nearest the pump and work towards either end. It may be a few feet in from the edge of the coach.

This is a good suggestion and where ours is located. The most reasonable location for the level sensor to level the coach. Ours is mid-ship and about 18 inches in from the curb side of the coach.

Bob

[jsmmonaco]

Found it, thanks

[DocUSAF]

Originally Posted by jsmmonaco

Found it, thanks

Let us know what you find out...I'm Still trying to figure out our 2006 Monaco leveling control 6 pin wiring infomation.. Power Gear TIP sheet covers Spartan & Freightliner hookups but no Roadmaster chassis control wiring schematic... Would hate to fry a new controller from improper wiring 6 pin connector..

[jsmmonaco]

Will do.......might be a month or so until I can get it in......stay tuned.....