Community Forums

ROYBUCK · 03-02-2013, 08:02 AM

I know this subject has been beat to death. I have tried on rv.net for a answer to this question. I was going to sell my 2002 Endeavor but changed my mind and I am going to install Allure flooring, my question my endeavor has 3 slides they will not be but one slide involved, the living and dinning slide, as the members know the slide drops when it is extended and raises when retracted, I don't know if the slide is on rollers or not, can I install the Allure flooring (Vinly) without a slide problem. Thanks for all replys.

Roy

LaZy507 · 03-02-2013, 08:23 AM

Maybe this will help your issue.
Slide Out Floor Replacement Part 1 - YouTube

Drifter · 03-02-2013, 10:09 AM

The floor replacement of the YouTube video looks to be from a 5TH wheel and is all wood. The 2002 Endeavor is nothing like that, the construction is completely different. Metal is used and not wood. It's a very good video showing floor replacement but does not apply to the OP's coach.

Okrver · 03-03-2013, 10:05 PM

I have a 2002 Ambassador and I installed a few years ago with no slide issues.

Pat

mdc99 · 03-04-2013, 08:04 AM

I replaced the flooring in my 02 Endeaver (40PST) with vinyl tile. Since you say only 1 slide will be affected I presume you are going to keep the existing ceramic tile. On mine the slide that I think you are describing has rollers mounted on the floor that the slide rolls over. I did not have to do anything with those rollers and they are working fine with no damage to the vinyl. If you decide to remove the ceramic tile, that is a different issue and you will probably have rollers that will need to be addressed. Hope this helps. Mark