Is it possible to fit a Samsung RF18 in through the front door

[MTK46]

Did you look at http://www.irv2.com/forums/f115/resi...de-345968.html. I have pictures posted of how I mounted the front. You will need to slide it out to do it though.

[1CoolZ71]

Originally Posted by vito.a

Thanks. I just ordered the Travel Lock.

I'm still trying to fasten the refrigerator down. I've installed screws through the rear bottom grill but have not put anything on the front yet. I looked at the previous solutions but I'm trying to find a way to bolt it down without removing it again.

I removed the stock front leveling "L" brackets and straightened them in my vise.
Then I put them back on and was able to put a screw from the front through the wood to anchor the front

[rpasetto]

Didn't see anyone mention removing the door striker pins.... in addition to door check-strap and front seat.

[vito.a]

Originally Posted by rpasetto

Didn't see anyone mention removing the door striker pins.... in addition to door check-strap and front seat.

I did not have to remove the door striker pin. I did put a piece of tape over it to help protect the fridge.

The motor home door is 28" wide until it gets near the top and then it tapers down. The Samsung RF 18 is 24 1/2" wide with the doors and top electrical piece removed. As long as you lay it on its side it will go through the coach door fairly easy.

[rpasetto]

Originally Posted by vito.a

I did not have to remove the door striker pin. I did put a piece of tape over it to help protect the fridge.

The motor home door is 28" wide until it gets near the top and then it tapers down. The Samsung RF 18 is 24 1/2" wide with the doors and top electrical piece removed. As long as you lay it on its side it will go through the coach door fairly easy.

Glad you were able to get past without taking out those striker pins. When I did mine I figured Murphy's law would come into play so I took them off. I remember it was a pretty tight fit. Maybe the Sig door is wider than the Dynasty's.