Community Forums

wamcneil · 03-02-2017, 08:45 AM

Hi All,
I'm trying to get my locks working. I took one of the bay door latches to a locksmith, and they made a working key for it, but it's not working in the entry door.
Is the entry door supposed to be a different key cut and/or profile?
I have another key that kind of works on the entry door, but it is a different (possibly wrong) profile, and slightly different cut than what the locksmith pulled off the bay door cylinder. I have to fuss with it a lot to get it to work in the entry door.
The new key is ILCO 1666 TM19, which fits in both the bay doors and entry door, but it won't open the entry door.
I have an old broken-off key that is ILCO 1607 TM7, but it has a slightly different profile.
Could somebody with similar coach see what profile your keys are?
Thanks,
Walter

Woodchopper · 03-02-2017, 10:52 AM

Quote:

Originally Posted by wamcneil

Hi All,
Is the entry door supposed to be a different key cut and/or profile?
Walter

wamcneil
Mine is the same key cut to a different profile

CadillLinc · 03-02-2017, 01:55 PM

On my 2004 Monaco Knight, my entry door key is a Trimark TM220 (single sided). My bay door key is a Trimark 2001 (double sided). Both are widely available pre-cut on the Internet. Many motorhomes use the same key - try your neighbors keys.

Gene M

barmcd · 03-02-2017, 02:04 PM

On my 2000 Dynasty, the door key opens the curb side doors and another key opens the road side doors. It's an odd combo.

wamcneil · 03-02-2017, 09:05 PM

Thanks all.
Turns out the Monaco build sheet lists key codes! According to the build sheet, both of my keys 'should' be the same. I found a place that sells keys cut to code, so I ordered one. Fingers crossed. I'll try to remember to check back in when I get the key.

vito.a · 03-03-2017, 08:27 AM

You can call Trimark with the number and order new keys that are identical to the OEM keys. I've done it with several Monaco coaches.
Toll Free: 800-431-8616