Keyless entry code

[Barrier2]

Hello all, Hate to be nuisance but does anybody with a Dynasty and Keyless push button code (Ford Version 2001) know how to find and reprogram the code?
Barrier

[Happycarz]

Tri Mark used several versions on the different Monaco products.

This is a manual for a 2007 Dynasty. http://www.trimarkcorp.com/en/media/...2_Consumer.pdf

[Barrier2]

Thanks for the response HappyCarz, My unit is a 2001 with the Ford button system, at least the control box in the front outside electric box and antenna say Ford. I have the keyfobs and they work fine but I need the code for the buttons next to the door. This is no big deal it just bothers me to have it there and not be able to use it.
Barrier

[LewF]

Harry, thanks for the door lock information. I have a new 2009 Camelot and the e-ASK system manual provided only covered the key fob and not the door entry pushbuttons. I was looking everywhere for the default code and programming instructions. Thanks to you I now have them and have the door programed for us now.

(The coach is so new to us I don't have a new picture to change my avatar - maybe next week.)

Lew

[JPMaly]

I dont know if this will help, but I talked to a fellow that had a mid 90's HR Navigator and I remember him telling me the code was written in the electrical compartment, near one of the fuse cases. He told me he got the info from someone at a HR rally.

[mohotravelers]

We have an 01 Exec. The code number is listed as the serial number for the keyless entry on the coach spec sheet. It is also on a sticker on the control unit in the electrical bay drivers side front (looks like a 5 digit part number). Good luck. No idea how to reprogram as we liked our code just fine.

[svo86]

If you can find a owners manual for ford car, 2000 plus, it tells you how to program it to the code you want. You first have to put the code in that is on the control module in the electrical bay. I used my daughter's manual from her Ford Explorer when she was here. I have a 2001 Dynasty.
Hope this helps.

[Barrier2]

Thanks for all your help, I found the Code. Mohotravelers it was the seriel number on the sheet you mentioned. I saw that but thought it was just a serial number. While playing I tried it.
I think I'll just leave it the same number.
Barrier

[CaptPat]

Quote:

Originally Posted by LewF Harry, thanks for the door lock information. I have a new 2009 Camelot and the e-ASK system manual provided only covered the key fob and not the door entry pushbuttons. I was looking everywhere for the default code and programming instructions. Thanks to you I now have them and have the door programed for us now. (The coach is so new to us I don't have a new picture to change my avatar - maybe next week.) Lew

Lew

If you go to the trimark website you can find the manual to set the entry door push puttons--that's how I got the infor to reset mine. Admittedly the right manual is a bit difficult to find. PM me an email address and I can email the pdf file to you when I get home.

Pat

[LewF]

Pat, I got it and have set in our codes. Thanks.

Lew