|
Since that light fixture is part of the Intelletec system, check that you are getting voltage to the lamp while the switch is on and the light is off. Also, test both lamp fixtures while off the ceiling by apply 12v and ground to each fixture. Does the light come on? If not, take out a bulb and see if you have voltage and ground at the bulb socket. You may not be getting voltage or ground all the time to the bulb. So, while it is acting up, start testing the wires. I could be wrong and you could very well have two bad fixtures. I just wanted to offer some troubleshooting.
__________________
Harry & Sheryl
2008 Camelot 40 PDQ
|