 |
04-06-2010, 08:12 PM
|
#1
|
|
Senior Member
Join Date: Mar 2010
Location: Fowlerville, Mich.
Posts: 368
|
I went to check the hydraulic fluid level on my 2000 Diplomat but the dipstick fell off of the reservoir cap into the reservoir. I tried fishing it out with a magnetic pick-up and a claw tool with no luck. Short of removing the container and dumping it out anybody have any ideas??
Thanks,
Greg
__________________
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-06-2010, 08:26 PM
|
#2
|
|
Senior Member
Monaco Owners Club
Join Date: Nov 2008
Location: Melbourne & Marathon, Florida
Posts: 1,535
|
Stronger magnet!
__________________
2005 Safari Cheetah 38PDQ - 2009 Ford Flex
Me (Gatogonow), The Boss (DW), Honey Bunny(The Gato)!
|
|
|
|
| |
|
04-07-2010, 12:19 AM
|
#3
|
|
Senior Member
Monaco Owners Club
Join Date: Apr 2005
Location: Moorpark, Ca.
Posts: 2,109
|
Greg...If it's like mine, pull the filter out and stick your hand in there. I can reach inside the entire reservoir.
__________________
Don & Mary
2005 Monaco Diplomat 36SKT - 400 ISL 
2010 Nissan Frontier - CrewCab - 4WD
|
|
|
|
| |
|
05-03-2010, 02:23 PM
|
#4
|
|
Member
Join Date: Dec 2009
Location: Anywhere USA
Posts: 32
|
Are you sure there was one there? Allison says the access at the rear is put on by the chassis manufacturer. Their dipsticks are short ones down on the side of the trans.
I went to check my fluid on a new to me '06 Camelot and when I took off the cap there was no rod! I thought the same thing - that it fell down into the trans. I called Allison and got the info above. They also said even it was on there and fell down into the tube there's no moving parts at the bottom so it wouldn't hurt anything.
What do I know?????!!!!!!
I put a question out on another post to see if anyone else has run into my situation on a Monaco.
__________________
|
|
|
|
| |
|
05-03-2010, 02:45 PM
|
#5
|
|
Senior Member
Monaco Owners Club
Join Date: Jan 2001
Location: Foley, AL
Posts: 994
|
Hossandjo the original poster was speaking of the hydraulic reservoir and not the transmission.
__________________
Rex
2001 Monaco Diplomat 40' PDQ - 08 Honda CR-V
|
|
|
|
| |
|
05-03-2010, 03:27 PM
|
#6
|
|
Senior Member
Join Date: Mar 2010
Location: Fowlerville, Mich.
Posts: 368
|
Well I looked real hard at the canister the other day and saw that there was a large bolt holding the top cover on. Removed the bolt, it had a spring and a gasket on it, reached in and retrived the dip stick. I remounted it to the filler cap using a nylock nut.
Thanks,
Greg
__________________
|
|
|
|
| |
|
05-04-2010, 07:56 AM
|
#7
|
|
Senior Member
Monaco Owners Club
Join Date: Jul 2001
Location: SD
Posts: 613
|
I lost mine some time back too. I had unscrewed it too far when loosening it to check the fluid level. I removed the lid and got it with a magnet. I suspect that vibration could loosen it up so using a nylock nut is good idea.
Ron
__________________
2004 HR Imperial
|
|
|
|
| |
|
05-04-2010, 12:33 PM
|
#8
|
|
Senior Member
Monaco Owners Club
Join Date: Apr 2005
Location: Moorpark, Ca.
Posts: 2,109
|
mahon1993...Glad you found your dipstick
__________________
Don & Mary
2005 Monaco Diplomat 36SKT - 400 ISL 
2010 Nissan Frontier - CrewCab - 4WD
|
|
|
|
| |
|
05-04-2010, 07:26 PM
|
#9
|
|
Senior Member
Join Date: Mar 2010
Location: Fowlerville, Mich.
Posts: 368
|
I'm glad I found it too. I thought that the filler cap unscrews, but it does not. It is actually just a press fit. By trying to unscrew it when I didn't have to I unscrewed the dipstick from the cap and it fell in. You know, If it's one thing I hate it's driving around without my dipstick.
__________________
|
|
|
|
| |
|
 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

»
Recent Discussions

»
Upcoming Rallies
No events scheduled in the next 365 days.
|
»
iRV2 on facebook
|
Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 12:17 AM.