Monaco Boost Gage

[hardy1000]

On my way back from the Sierras I noticed my boost gage quit working so I pulled the gage and removed the air line on the back of the gage and started the engine to check to check if there was any air comming out of the line which there wasn't. I then pulled the dog house and tried to find the line to check if it had blockage but wasn't sure which line or if any of these 2 pic's showed it. If any one can help idenify the correct line I would appriciate it.

[Rex]

The air line you are looking for I did not see in your pictures. Mine goes to the CAC inlet on the driver's side and is on the bottom. The line runs about a foot away from the turbo and goes straight to a fitting on the bottom of the CAC inlet. It is covered with split wire loom.

[walt2137]

And to add to Rex info it will be 1/4 black plastic tubing and probably got knocked off or got next to the exhaust manifold and burnt a hole in it.

[hardy1000]

Thanks guys, I will try again.