iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
YC1: Although your post shows a rear run box that is quite different than my Dynasty may I ask where you were able to get that PDF?? Thanks
Two places. Before the original Monaco went away there was access to their system and I grabbed as much information that was available. In addition to that I was able to buy a CD with schematics and lots of useful information.
I would like to see a picture of the fuse box you are referring to. It seems strange our rv's would be dramatically different.
Is this box in the battery compartment? The one I showed is in the last compartment on the right at the rear.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
YC1, how do you post a PDF file? I searched how to do such, with no luck, before I responded to the OP. I have the schematic, but don't know how to post it.
YC1: The Dynasty and the Sig have completely different wiring than your coach. The rear run box is metal and about 16 inches wide and 18 or more tall. Inside are a number of separate computer boards as well as the Big Boy and associated relays and control board. Unfortunately the box is not weatherproof and some owners have problems with corrosion on the boards. I too managed to download some of the parts info when the system was open. But like an idiot I only saved what I thought I might need! Does your coach have a multiplex system? Our front run bays are also different.
YC1: The Dynasty and the Sig have completely different wiring than your coach. The rear run box is metal and about 16 inches wide and 18 or more tall. Inside are a number of separate computer boards as well as the Big Boy and associated relays and control board. Unfortunately the box is not weatherproof and some owners have problems with corrosion on the boards. I too managed to download some of the parts info when the system was open. But like an idiot I only saved what I thought I might need! Does your coach have a multiplex system? Our front run bays are also different.
Interesting. I wonder why the huge differences. I do not have a multiplex system.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
YC1, how do you post a PDF file? I searched how to do such, with no luck, before I responded to the OP. I have the schematic, but don't know how to post it.
I am using the Quote area to reply but to attach a pdf just go to the Reply section and then select Advanced.
See the paper clip above? It is the attachment selection tool. Before I get this far I usually place the item to be attached on my desktop or in "my documents" so it is easy to find. Now select the paper clip icon.
Click the first Browse button and follow it to your file. Select the file and then hit open. The page will return and then click the upload button. Then hit the close window button.
And hopefully some pictures will be attached here to help.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008
Thank you gentlmen. Harry's is the same as mine.
Trying to get the wet bay heater working for this winter. Last year the fan would come on, but no heat. Figured I would start with the simple things, like the fuses.
Cheers... Ben.
__________________
Ben & Sharon
2008 43' Holiday Rambler Scepter PDQ
If you have a "Cargo" heater that blows cold air only then the thermal fuse inside the heater is broken. I bypassed mine which requires removing the unit, taking it apart, removing the inline thermal fuse and re-soldering the wire. Don't worry about there being no fuse..the unit doesn't get that hot to begin with.