Pull Out size help on 40 PLQ

[Woody43]

Hi all and new here but not to the RV life. I just bought a new to me 2005 HR Ambassador / Monaco Knight 40 PLQ. It has two door full pass through that I want to put slides in. Problem is I don't pick it up till this weekend and it is 4 hours away. I need to order the slides so I can pick them up down there. Can someone with either tell me the opening size and the width from door to other side door? Thanks a bunch!

Cheers,

Woody

[Robi.1014]

Woody,
Welcome to the site. My rig is in storage, so I can't offer the dimensions you are requesting. Hopefully, someone will chime-in shortly.

What I'd like to offer is that you might save a bundle by purchasing a surplus slide-system. Take a look at: RV Exterior Body Panels Used RV Parts For Sale | rvexteriorbodypanels.visonerv.com

[Woody43]

Robi, thanks a bunch for the link... Wow. All I can say is make sure the smoke detector battery works and you have a couple fire extinguishers.

[traveler999]

When I put slides in my 99 Windsor, I just got the slides themselves, and put plywood between them for the floor. That way you can make them any width you want.

[bborc]

On my 07 pdq 40ft Knight the slide is 36 inches wide and 90 inches long, that is the way it came from the factory. Hope this helps.

[Woody43]

Got to my coach so I could measure it. 42" x 90", I do have a central vac that cuts into one so it will have to be 33" wide.

[96 Wideglide]

They didn't mount your central vac high up on the wall?

[Woody43]

Originally Posted by 96 Wideglide

They didn't mount your central vac high up on the wall?

No it's down towards the bottom where he would interfere. I did not look to see if I would be able to relocate it Hyrock which might be an option.