Rear lower corner Slide seal leak

[Timaz]

I have a Rear lower corner Slide seal leak in rear slide. The corner of the seal has relaxed away from the slide...the seal mounted on the coach not the slide.
Has anyone tried to use a blow dryer to relaxed one of these seals so it will go back to its original form? This works to bring a fridge seal back to shape.

[Timaz]

Does anyone know how much of a job it is to change the slide out seal that is mounted on the coach and not the slide?

[vito.a]

I have a rear slide out seal that will occasionally leak. Our seal is designed to rub on the slide (it has a sandpaper like strip on the slide) as it extends and this is supposed to pull the seal outward. The problem is, it sometimes stays inward. I use a plastic door trim tool to insert under the seal and pull it outward and then it seals well.

I will need to replace the seal eventually. Steele rubber products has a wide variety of seals.
https://www.steelerubber.com/

[Timaz]

Thanks Vito