Community Forums

jeepsrule · 06-29-2010, 08:02 PM

Thanks to the posts in this forum I was able to get new remote key fobs from TriMark but now I have to program them. The manual just says locate the controller behind the dash. Ha, there's a lot of stuff behind that dash!! I have the instructions from TriMark to do the fob training but does anyone know the general location of the electronics controller for the remotes?? I really don't want to have to take the whole dash apart if I don't have to.

Dutch Star Don · 06-29-2010, 08:29 PM

jeepsrule.....On my 05 you could see it by leaning in the front steps and looking up behind the center drawers on the dash. On others, you pull the front two drawers below the dash and you will see it there. Last place to look if it's not there is to pull the cover over the gauges and look down to your right.

Here is a link http://www.irv2.com/forums/f115/trim...ion-61618.html to where it's located and what it looks like. The link also has some ideas on moving the blinking light to the dash area where's it visible.

MonacoMama · 06-30-2010, 02:31 AM

Jeepsrule..
A quick way to try and find it first without having to read through all that is to go out at night in a dark coach and "turn on the alarm" You can lie down and look around under dash to see if you can find the blinking red light.
..and yes... Ours was also behind that set of drawers in the middle of the dash area.