|
03-23-2018, 08:25 AM
|
#1
|
Senior Member
Monaco Owners Club
Join Date: Jul 2014
Location: Clinton Twp , MI
Posts: 125
|
remote lock/unlock of bays
This is Michbill. We have a 2009 Monaco Dynasty Regal IV. I know I use to know how to lock and unlock the bays from the keyless entry however, I no longer remember. I have looked in the book and can't find it. Would someone kindly refresh my memory.
Thanks
Bill
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
03-23-2018, 08:38 AM
|
#2
|
Senior Member
Monaco Owners Club Newmar Owners Club
Join Date: Dec 2014
Location: out west
Posts: 1,061
|
I hold the 1/2 button on the keypad for 3 to 5 seconds and the bay doors unlock on my 06 Beaver.
__________________
2017 Dutchstar 4369 Spartan Chassis, 2200W Solar, 1200AH Lithium Batteries, Active Air
2022 Jeep Grand Cherokee, Roadmaster Sterling, AF1
|
|
|
03-23-2018, 09:24 AM
|
#3
|
Senior Member
Monaco Owners Club
Join Date: Jun 2011
Location: CA
Posts: 4,452
|
Quote:
Originally Posted by Michbill
This is Michbill. We have a 2009 Monaco Dynasty Regal IV. I know I use to know how to lock and unlock the bays from the keyless entry however, I no longer remember. I have looked in the book and can't find it. Would someone kindly refresh my memory.
Thanks
Bill
|
on my trimark system
hold 1/2 key down for a couple seconds and it locks everything. Entrance door has to be shut or it won't lock. You can't close it after you hold the 1/2 button down and expect it to be locked.
to unlock, you need your pin code (pass code)
(your pin code), 1/2 key, 1/2 key and it unlocks my entrance door only
(your pin code), 1/2 key, 3/4 key unlocks all bay doors and entrance door.
Those are the different combinations we use.
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
|
|
|
03-23-2018, 10:42 AM
|
#4
|
Senior Member
Join Date: Apr 2008
Location: On the Road
Posts: 1,223
|
We use a four digit pin code for the door followed by number 9 for the bays
__________________
Dan & Arlene
2005 Monaco Dynasty Diamond IV
Chasing the good weather
|
|
|
03-23-2018, 01:55 PM
|
#5
|
Senior Member
Monaco Owners Club
Join Date: Mar 2014
Location: Somewhere Nice
Posts: 1,466
|
Just went through this on my 08 Dynasty. To lock all doors, hold down #1 on keypad until you hear locks engage.
To unlock using keypad, enter your five digit code,pause for beep, then press #1. All unlock.
If you haven’t set a five digit unlock code, the factory preset code is 4-4-4-4-4 then 1.
|
|
|
03-24-2018, 09:56 AM
|
#6
|
Senior Member
Monaco Owners Club
Join Date: Mar 2014
Location: Somewhere Nice
Posts: 1,466
|
My mistake. 4-4-4-4-4 is the factory set Authority Code.
The factory set Access Code is 1-2-3-4-4...then wait for beep then press 1. This will open all doors.
The attached documents might help you or go to the Trimark website for more info. They have several youtube videos that are helpful.
__________________
2008 Monaco Dynasty Squire
Paul & Luci
|
|
|
03-24-2018, 12:16 PM
|
#7
|
Senior Member
Monaco Owners Club
Join Date: Jul 2014
Location: Clinton Twp , MI
Posts: 125
|
lock and unlock
Thank you all for the information. I don't know were this important stuff disapears to. I can remember the meaningless stuff.
Thanks
Bill
|
|
|
03-24-2018, 01:09 PM
|
#8
|
Senior Member
Monaco Owners Club
Join Date: May 2016
Location: On the road, again
Posts: 432
|
If you have the build sheet for the unit. The access code was listed on mine for the keyless number , 5 digit code
__________________
posted from 2001 Monaco Exec 40DSFD, ISM 500
tags from the live free or die state, trailer - Z3 roadster on board
|
|
|
03-28-2018, 05:45 AM
|
#9
|
Senior Member
Join Date: Nov 2010
Location: Florida
Posts: 185
|
we use our pin code to open main door followed by the number 7 to unlock bay doors
__________________
cheryl and susan,
2004 Safari Trek
Spyder & GJC
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|