Quote:
Originally Posted by burk30
Has anyone ever tried replacing or recovering the fabric inserts in their RV fascia? I have a 2000 Monaco LaPalma. I am also wanting to remove the valances over the windows and recover them as well.
|
I`ve removed valances on 3 coaches & they were installed the same -- There will be screws,usually 1to 3, going into the overhead cabinets, & tabs on each side - The blinds are attached to the valance, & will come down with it -- The valance legs are usually just screwed on --
I haven`t recovered the fascia , but they are probably installed using a metal plate with teeth that are attached to the back side of the board that the fascia is made of -- I have done chairs, & the backs were attached using these plates -- After covering, reinstall by just hammering on the front of the fascia with a clean hammer head -- The teeth are not very long & easy to reinstall if you can get then back into the orginal spot-- Just get a putty knife or screwdriver & pry them off -- Bill Willard