Slide adjustment

[mydogmax]

my rh bedroom slide contacts the wall on the lh side when out and the rh side or rear has a gap between the slide and wall. How do I adjust that?

[RileyCaton]

It depends on what type of slide mechanism each slide has. If the mechanism is a double rack and pinion, then there is a slip joint on the drive shaft that can be loosened and adjusted so the slide lands correctly. There also may be bolts that limit how far the slide can move. The bolts are usually somewhere around the rack and pinion mounts.

[mlh2013]

Originally Posted by mydogmax

my rh bedroom slide contacts the wall on the lh side when out and the rh side or rear has a gap between the slide and wall. How do I adjust that?

Was you able to adjust your slide? I have the same issue with the bedroom slide on my 02 Windsor?

[mydogmax]

Have not tried yet, still installing working on installing a new tv in the front.

[windsorbill]

There are a few threads floating around here about wood rot and rollers digging into the slide floors. I would encourage you to inspect the underside of the slides (from outside with the slide extended) and look for any rot or damage caused by the rollers before you start adjusting the slides. If you do find any rot or plywood separation, which is common on Monaco coaches, then you need to address that before anything else.