|
Yes, I did the upgrade, I bought the components from M&M Electronics. The upgrade consisted of a new board, new load management display, and 2 wiring harnesses, and a coil for reading amps on the neutral line (if my memory serves me right).
From talking to M&M you have to use a new load display with the upgraded board.
One of the wiring harnesses go to the load meter and the other is for 12 volt feed from chassis and/or generator.
Instructions were still hazy but I got through it.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|
Linear Mode
