Stairwell Toe Kicks

[Topman]

Looks great.
Thanks for the idea....
Iver.

[ArmyEOD]

Don, yes using the screws may be the best way to go. I may need to remove them in the future. I picked the kick plates up this past weekend, but due to weather here in the SE, I could not do anywork in the well. I have a friend who has a sheet metal sheer and he said that if I mark them he will cut them for me.

[roscoesdad]

Just finished installing mine. My cabinet handles are brass, so I used same plates as you only brass. I used a band saw to cut them down to size. Worked well. I also drilled holes in the top of the 7 inch piece to match the lower holes using a drill press. The lip on the top shelf covers them when down, but should be easy to replace if needed. Thanks for the idea. Keep them coming.

[JimM68]

When spring comes and I can retrieve the knight from the storage lot and have some fun, I'll just have to go thru DD's full list.

Thanks again Don!

[wrongwayknt]

Looks great...I'm pulling carpet and putting in laminate in the spring before our "big" trip...I was looking for a way to finish off the stairs...Thanks1