 |
Storage compartment handle came off
06-20-2011, 05:04 PM
|
#1
|
|
Junior Member
Join Date: Dec 2010
Posts: 10
|
Pulled on one of the basement storage compartments and the handle came off in my hand, it looks like two pins on the under side of the latch where worn out and snapped off.
Can these be replaced and if so where would i get them from.
Thanks,
John
__________________
01 40' Holiday Rambler Imperial
350HP Cummins / Allison Transmission
03 Ford Explorer 4x4 / 98 Ultra Classic
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-20-2011, 06:31 PM
|
#2
|
|
Senior Member
Monaco Owners Club
Join Date: Sep 2007
Location: Gilbert, AZ
Posts: 649
|
Call North West RV Supply in Eugene, OR -- Toll free 866-678-7467 -- Bill Willard
__________________
|
|
|
|
| |
|
06-20-2011, 07:54 PM
|
#3
|
|
Senior Member
Monaco Owners Club
Join Date: Aug 2010
Location: Irondale, Alabama
Posts: 192
|
Google "Trimark Baggage Latch" I think that is what you are looking for.
__________________
2008 Monaco Camelot 42 DSQ
Irondale, Alabama
|
|
|
|
| |
|
06-20-2011, 10:25 PM
|
#4
|
|
Senior Member
Monaco Owners Club
Join Date: Apr 2005
Location: Moorpark, Ca.
Posts: 2,109
|
Don't call Monaco, they wanted $250.00 (unpainted) for one of those handles. Usually, you can replace the pins with a small bolt and nut if you need to.
__________________
Don & Mary
2005 Monaco Diplomat 36SKT - 400 ISL 
2010 Nissan Frontier - CrewCab - 4WD
|
|
|
|
| |
|
06-21-2011, 05:55 AM
|
#5
|
|
Senior Member
Monaco Owners Club
Join Date: Jan 2001
Location: Foley, AL
Posts: 994
|
John, if yours is like mine, the pins can be put back in if you still have the pins. They are knurled on one end that is supposed to hold them in place. There is a small plastic washer that goes in the handle hole and the pin inserts into it to keep the handle from rubbing the sides.
Remove the entire unit from the door by removing the 4-screws on the back side of the door. place the handle in the base and insert the pin from the outside back side of the base. Once the unit is off the door you will see where the pin goes. Drive the pin flush and you have fixed it.
I check mine a couple of times a year as the pins will work themselves out. A little locktite may fix the problem.
Rex Darley 01 Diplomat 40 PBD
__________________
Rex
2001 Monaco Diplomat 40' PDQ - 08 Honda CR-V
|
|
|
|
| |
|
06-27-2011, 02:22 PM
|
#6
|
|
Member
Join Date: Apr 2011
Posts: 36
|
Quote:
Originally Posted by Rex
John, if yours is like mine, the pins can be put back in if you still have the pins. They are knurled on one end that is supposed to hold them in place. There is a small plastic washer that goes in the handle hole and the pin inserts into it to keep the handle from rubbing the sides.
Remove the entire unit from the door by removing the 4-screws on the back side of the door. place the handle in the base and insert the pin from the outside back side of the base. Once the unit is off the door you will see where the pin goes. Drive the pin flush and you have fixed it.
I check mine a couple of times a year as the pins will work themselves out. A little locktite may fix the problem.
Rex Darley 01 Diplomat 40 PBD
|
This is good advice. I have one loose one! It's going to get checked tonight!
__________________
Patrick Plummer
2001 Holiday Rambler 34PBD
Still working!
|
|
|
|
| |
|
06-27-2011, 02:32 PM
|
#7
|
|
Senior Member
Join Date: May 2008
Posts: 730
|
I bought two handles in Quartzsite from The Gambler at 7.50 each. I fixed the one that had lost a pin with a nut & bolt. But ended up replacing that with a roll pin, it worked great. You should be able to get the right size roll pin at Lowes, HD or any automotive store.
__________________
Joe & Angie
Shih Tzu's Cookie & Rocky
2001 Tradewinds 7390 2011 CRV EX-L Navi
|
|
|
|
| |
|
08-07-2011, 06:57 AM
|
#8
|
|
Junior Member
Join Date: Dec 2010
Posts: 10
|
Contacted Trimark they are very helpful, they mailed me new pins.
Everything works great.
Thanks to every one
__________________
01 40' Holiday Rambler Imperial
350HP Cummins / Allison Transmission
03 Ford Explorer 4x4 / 98 Ultra Classic
|
|
|
|
| |
|
08-08-2011, 06:57 AM
|
#9
|
|
Member
Join Date: Apr 2011
Posts: 36
|
I just jinxed myself by posting on this thread. I camped up in West Virginia this weekend at a state park to do some golfing. My brother-in-law came to me with the handle off one of my doors in his hand. Oops. The pin was still in the handle so I punched it back in, but I'll call Trimark and see if they will send me some pins today.
__________________
Patrick Plummer
2001 Holiday Rambler 34PBD
Still working!
|
|
|
|
| |
|
 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

»
Recent Discussions

»
Upcoming Rallies
No events scheduled in the next 365 days.
|
»
iRV2 on facebook
|
Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 05:44 AM.