Tecma Red Light

[DipHop]

Has anyone with the Tecma electric toilet experienced problems with the red light staying on. We have a Diplomat 40SFT and we can't get the light to clear. We can still flush the toilet by over riding the switch but that is not the optimum way to do it. The tank is empty and flushed until clear water comes out and I realize something could still be hung up on the sensor. My concern is that it could be the circuit board or the flush switch. Is there a way to trouble shoot the electronics without replacing the circuit board or flush switch. Any advice would be helpful.

[Lukeaa]

You have the same coach as me. The Techma sensors are on the outside of the tank, so nothing can hang up on the sensor. The two sensors are on the road side end of the tank. About 1" squares. You can see them if you get a mirror and luck up behind the white plastic. The black tank is the forward tank. I would give Monaco tech support a call or Thetford tech support. Let me know what the solution is, so I can avoid it.

Luke