Community Forums

Gary8346 · 01-25-2016, 08:15 AM

Can't find the fuse for all the lights in the passenger (galley) slide. Any guesses?

YC1 · 01-25-2016, 11:08 AM

F9,10,11 in the bedroom fuse panel.

I cannot remember which fuse I had problems with but it turned out to be a connection on the back of the fuse panel. If you don't find a blown fuse after measuring both sides of the fuses then go ahead and wiggle away.

I had to use a Fox and Hound to chase it from the front to the fuse panel.

Mine is an 08 Endeavor so your mileage will vary.

Gary8346 · 01-25-2016, 12:21 PM

I can't find any of those blown. My wife was just changing to LID lamps. It's a little hard to get those thin wires into the sockets without bending them. I think she just shorted a couple together.

Gary8346 · 01-25-2016, 12:22 PM

That fuse list looked just like mine. Thanks a lot.

YC1 · 01-25-2016, 03:31 PM

Just a chance but led's can be polarity sensitive depending on their design. So put the old bulb back in for a quick test.

nodine · 01-26-2016, 04:57 AM

Quote:

Originally Posted by Gary8346

I can't find any of those blown. My wife was just changing to LID lamps. It's a little hard to get those thin wires into the sockets without bending them. I think she just shorted a couple together.

Myron is correct. The LED replacement lamps that have the small wires in the base are polarity sensitive. Rotate the bulb and see if that makes a difference.

Bob