Join CruisersForum Today
Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
Wind Noise
Old 08-05-2010, 03:23 PM   #1
bdpreece is offline
Senior Member
bdpreece's Avatar
Monaco Owners Club
Join Date: Mar 2000
Location: Woodburn Oregon USA
Posts: 1,371
Purchased our 08 Endeavor 40PDQ new June 10th of this year. So far we have only take it out twice and both times my wife is having fits that the wind noise around the entry door sounds like a window partly open in a car. After the first trip I tried using weather striping around the door but that did not seem to help. Next we took it in to the dealer so I complained and they put a larger seal around the door. The wife says the noise is still bad. I have taped off the weep holes in the windows also. Being deaf as a post I don't really hear it. Has anyone else had this problem and if so were you able to fix it?

__________________
Brian, Loretta & Daisy (Golden Retriever)
2008 Holiday Rambler Endeavor 40 PDQ , ISL 400
2008 Ford Explorer toad
  Reply With Quote
   
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-05-2010, 04:10 PM   #2
Gordon66 is offline
Senior Member
Gordon66's Avatar
Monaco Owners Club
Join Date: Dec 2006
Location: Victoria, Texas
Posts: 153
I had the same issue with out Diplomat. I tried all kinds of weather striping and nothing worked. Finally I put tape on the joint between the door frame and the fiberglass panel in the door. all wind noise stopped. I pulled the tape off and sealed the joint with clear tube and bath caulk. Been noise free for over a year.

__________________
Larry & Doni
2007 Monaco Diplomat 40' PDQ Cummins 400 ISL
South Texas Renegades FMCA F376075
  Reply With Quote
   
Old 08-05-2010, 07:52 PM   #3
loranimal is offline
Senior Member
loranimal's Avatar
Join Date: Nov 2004
Location: Fallon - NV / St.Paul Island AK
Posts: 226
Had the same problem. Ended up being the same fix as Gordon. Ran 2" wide electrical tape down the seam and the noise all but stopped. Took the tape off and sealed the crack with black sealer. It matches the door frame real close. Won't notice it until you look for it.

Hope it works for you.

Carl
__________________
Carl & Barb - 2007 Monaco Camelot 42PDQ.
  Reply With Quote
   
Old 08-05-2010, 08:31 PM   #4
DennisZ is offline
Senior Member
DennisZ's Avatar
Monaco Owners Club
Join Date: May 2006
Location: Lancaster, CA
Posts: 223
I have the same noise. Is the seam you guys are talking about on the inside or outside of the door?

Thanks
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Lancaster, CA
2008 HR Endeavor 40PDQ / 2008 Lincoln MKX Toad
  Reply With Quote
   
Old 08-05-2010, 10:18 PM   #5
Gordon66 is offline
Senior Member
Gordon66's Avatar
Monaco Owners Club
Join Date: Dec 2006
Location: Victoria, Texas
Posts: 153
It's on the outside. I also sealed around the window frame.
__________________
Larry & Doni
2007 Monaco Diplomat 40' PDQ Cummins 400 ISL
South Texas Renegades FMCA F376075
  Reply With Quote
   
Old 08-17-2010, 06:12 PM   #6
DennisZ is offline
Senior Member
DennisZ's Avatar
Monaco Owners Club
Join Date: May 2006
Location: Lancaster, CA
Posts: 223
What a difference!!! The wind noise is all but gone. I had a real big gap at the top of the door, and much smaller ones on the edges, the window seemed to be well sealed.

Thanks for the info
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Lancaster, CA
2008 HR Endeavor 40PDQ / 2008 Lincoln MKX Toad
  Reply With Quote
   
Old 08-30-2010, 02:04 PM   #7
bdpreece is offline
Senior Member
bdpreece's Avatar
Monaco Owners Club
Join Date: Mar 2000
Location: Woodburn Oregon USA
Posts: 1,371
I also found that HR/Monaco were installing wind deflectors on the frame of the door as a fix for this problem. I called Manaco and they referred me to PTL engineering 810-664-2310. I ordered part #007-144 a 7.5 ft "L" shaped vinyl strip with double back tape that is placed on the frame as close to the hinge as possible. $28 plus shipping.
__________________
Brian, Loretta & Daisy (Golden Retriever)
2008 Holiday Rambler Endeavor 40 PDQ , ISL 400
2008 Ford Explorer toad
  Reply With Quote
   
Old 09-02-2010, 09:46 PM   #8
Marcel is offline
Member
Marcel's Avatar
Monaco Owners Club
Join Date: Sep 2008
Location: Albeerta
Posts: 50
I also have 2008 HR with wind problem monaco install l shaped vinyl strip did not help at all so don,t waste your money. last week i put tape around the door still didn,t help.don,t know what to do next
__________________
Marcel Jeannette

2008 Endeavor
  Reply With Quote
   
Old 09-07-2010, 07:18 PM   #9
DocUSAF is offline
Senior Member
DocUSAF's Avatar
Monaco Owners Club
Join Date: Jun 2008
Location: OH, FL, LA, WY, KS & TX
Posts: 163
Can anyone who has a good fix, please post a pic of your fix....thanks
__________________
2006 Monaco Knight 40/PLQ
330 ISC Cummins/3000 Allison
FMCA #F393140 DAV & VFW
  Reply With Quote
   
Old 09-08-2010, 12:22 PM   #10
bdpreece is offline
Senior Member
bdpreece's Avatar
Monaco Owners Club
Join Date: Mar 2000
Location: Woodburn Oregon USA
Posts: 1,371
Have not received the strip yet but the bill was here when I returned from camping with the family over Labor Day.

Wind Deflector w/tape 7 1/2 ft $28.50

Packaging Charges $27.00

Freight $19.49

Total $74.99

Don't think I would have ordered it if I had know about the packing charge. Looks like a rip off for a piece of vinyl.
__________________
Brian, Loretta & Daisy (Golden Retriever)
2008 Holiday Rambler Endeavor 40 PDQ , ISL 400
2008 Ford Explorer toad
  Reply With Quote
   
Old 09-08-2010, 06:13 PM   #11
RVRon is offline
Senior Member
RVRon's Avatar


Monaco Owners Club
Nor'easters Club
Join Date: Apr 2003
Location: Newburgh, NY, USA
Posts: 409
Seems a tad greedy on Monaco's part, considering it's a fix for a factory defect!!
__________________
Ron & Kathy FMCA F322327
'09 HR Endeavor 41PDQ
'08 Tahoe LTZ Toad


  Reply With Quote
   
Old 09-08-2010, 07:03 PM   #12
moisheh is offline
Senior Member


Join Date: Jul 2000
Posts: 1,257
The OP did not buy that part from Monaco. He said it was PTL Engineering.
__________________
Moisheh

2008 Dynasty 42' Diamond IV
  Reply With Quote
   
Old 09-08-2010, 08:14 PM   #13
BHEMOTH is offline
Member
BHEMOTH's Avatar
Join Date: Nov 2007
Posts: 60
We had similar problems with our 2008 Diplomat. We did the usual things, adjusted the door, shored up the weather stripping, particularly along the top of the door and the wind noise was reduced significantly. However, we still had wind noise from crosswinds, now I don't know that this will help you but we locked the door from the inside, both locks, and the wind noise was eliminated! Go figure.

The only annoyance now is the curb side awning, the covers over the slides do not stay tight in a crosswind and rattle.
__________________
  Reply With Quote
   
Old 09-09-2010, 06:51 AM   #14
RVRon is offline
Senior Member
RVRon's Avatar


Monaco Owners Club
Nor'easters Club
Join Date: Apr 2003
Location: Newburgh, NY, USA
Posts: 409
Quote:
Originally Posted by moisheh View Post
The OP did not buy that part from Monaco. He said it was PTL Engineering.
My bad......I have to learn to read the whole message.

__________________
Ron & Kathy FMCA F322327
'09 HR Endeavor 41PDQ
'08 Tahoe LTZ Toad


  Reply With Quote
   
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drivers Door Sliding window wind noise RTZ6885 Winnebago Industries Owner's Forum 0 04-19-2010 07:30 PM
Wind Noise Moosemuffs Winnebago Industries Owner's Forum 7 01-04-2010 02:04 PM
Wind Noise @ 65mph Monty W S Fleetwood Products Owner's Forum 32 12-07-2008 12:54 PM
Driver's door wind noise warrenh Winnebago Industries Owner's Forum 6 01-29-2006 01:31 PM
Wind Noise - Front Door D & D Rich Alpine Coach Forum 9 08-11-2005 08:25 PM

Download our Mobile App






1% for the Planet
» Upcoming Rallies
No events scheduled in
the next 365 days.
» iRV2 on facebook

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 02:46 AM.