Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 12-11-2010, 08:13 PM   #1
Member
 
junglturbine's Avatar
 
Join Date: Oct 2010
Posts: 35
Wind sensor?

Can anyone offer a source for a replacement wind sensor for a carefree awning on a Dynasty?
junglturbine is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 12-11-2010, 09:01 PM   #2
Senior Member
 
Mike Canter's Avatar
 
Join Date: Apr 2008
Location: Freeport, ME
Posts: 4,707
Call Girard up and they will send you the parts. Got to watch out for those trees. There are two types of wind sensors. If one type breaks you have to replace the whole unit. On the other type you can replace just the cups. It is worth updating. You should talk to them about it.
RV Awning | Electric Awnings | Electric RV Awning - Girard RV Awnings
__________________
Mike Canter
"Gunner" USN Retired, Airdale
2004 Monaco Signature 44' Conquest. Detroit 60
Mike Canter is offline   Reply With Quote
Old 12-23-2010, 01:00 AM   #3
Senior Member
 
Executive's Avatar
 
Monaco Owners Club
Join Date: Sep 2008
Posts: 102
Girard will send you the parts....but you might have to sell your soul to pay for them....they're expensive.....Dennis
Executive is offline   Reply With Quote
Old 12-23-2010, 07:29 AM   #4
Senior Member
 
Twomed's Avatar
 
Monaco Owners Club
Join Date: Oct 2009
Location: On the road
Posts: 2,123
Why put Girard parts on a Carefree??

http://www.ambientweather.com/dain79smwicu.html

From a Google on Carefree parts....one guy's solution.
__________________
Happy Trails,
06 Dynasty Countess III ISL//3060
07 Hummer H3
Twomed is offline   Reply With Quote
Old 01-08-2011, 10:24 PM   #5
Junior Member
 
Join Date: Jan 2011
Location: Auburn, WA
Posts: 12
Girard used to use the same anemometer that Carefree used. If you need the complete anemometer, Girard should have one. Replaced my broken on on my 05 Camelot with one from Girard, worked great.
ttroop is offline   Reply With Quote
Old 01-26-2011, 08:33 PM   #6
Junior Member
 
Join Date: Jan 2011
Location: Auburn, WA
Posts: 12
Located a sourse for the Girard - Carefree wind sensor. They both used the same sensor for a couple of years. Florida Automated Shade had a few of the wind sensors at the link below:

http://www.floridaautomatedshade.com/category_s/71.htm

Price is $73.50 plus shipping.
ttroop is offline   Reply With Quote
Old 01-27-2011, 11:00 AM   #7
Senior Member
 
Join Date: May 2010
Posts: 1,061
Carefree changed the wind sensor to a vibration sensor mounted on the end of the arm with the motor on it. They sell a kit for the conversion. The selling dealer paid for the kit, so I don't know what it cost. I installed it, it was pretty easy.
__________________
Gil
03 Prevost H3-45
Hoffman Conversion
ImagineIF is offline   Reply With Quote
Old 02-04-2011, 09:27 AM   #8
Member
 
junglturbine's Avatar
 
Join Date: Oct 2010
Posts: 35
Quote:
Originally Posted by ImagineIF View Post
Carefree changed the wind sensor to a vibration sensor mounted on the end of the arm with the motor on it. They sell a kit for the conversion. The selling dealer paid for the kit, so I don't know what it cost. I installed it, it was pretty easy.

Hi Gil,
Do you have any contact information and part numbers regarding the vibration sensor?

Thanks
junglturbine is offline   Reply With Quote
Old 02-04-2011, 06:10 PM   #9
Senior Member
 
Join Date: May 2010
Posts: 1,061
Here's the link:
http://www.carefreeofcolorado.com/do...20Response.pdf
Here's where you can buy it:
Carefree Eclipse 12v Power Awning

It cost more than I thought,

Gil
__________________
Gil
03 Prevost H3-45
Hoffman Conversion
ImagineIF is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind Sensor Protection mykee50 Monaco Owner's Forum 1 10-06-2010 08:42 AM
Inop Awning Wind Sensor; 2nd Time OldForester Alpine Coach Owner's Forum 6 04-01-2010 07:52 PM
Awning wind sensor Basil Shannon Alpine Coach Owner's Forum 11 11-10-2009 11:06 AM
Where is the wind sensor? VACMAN Newmar Owner's Forum 12 06-08-2009 08:38 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 04:54 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.