RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login

Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 11-08-2009, 07:50 PM   #1
Junior Member
 
Join Date: Oct 2009
Posts: 11
Wiring diagram 93 Monaco Dynasty 36'

I just bought this MH ,
1 - the entry steps were not working all the time and wen they did, the step entry lights would dim and even shut off.
so after finding all the wiring harness under the entry step, got the wire loom and tape off and there is the big mess ( a lot of corrosion at butt connections and wires appart ) we got some back togeter but not all we need wiring diagram to finish.

2 - there is a constant air leak in the front beside the levelers manual release valve, when the ignition is on,
the leak is at a 12 volts valve that run a air tube to a 4-6 inches round sphere (ball) and from that ball to the interior of the MH, can anyone tell me what activate that valve and what could be the problem.
thank you.
__________________

access is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 11-08-2009, 09:05 PM   #2
Junior Member
 
Join Date: Sep 2008
Location: Henderson Nevada
Posts: 5
Hello,
I have an entire diagram set that was mailed to me by a gentleman at Monaco for my 1992 Dynasty. If you like, I can dig through it this weekend, copy/scan it and get it to you. My e-mail is elecwhit@aol.com
Drop me a line.
Mike
__________________

elecwhit is offline   Reply With Quote
Old 11-09-2009, 07:55 AM   #3
Junior Member
 
Join Date: Oct 2009
Posts: 11
Hi Mike, I just asked you for wiring diagram on your other post ( anyone own 92 monaco) so yes I would love these diagram, what is the original paper size, and can I reproduce the same size on a regular printer.
my email : access2005@hotmail.com
Thank you,
Marcel
access is offline   Reply With Quote
Old 11-09-2009, 11:14 AM   #4
Senior Member
 
walt2137's Avatar
 
Monaco Owners Club
Join Date: Sep 2003
Location: Quitman MS
Posts: 2,954
2 - there is a constant air leak in the front beside the levelers manual release valve, when the ignition is on,
the leak is at a 12 volts valve that run a air tube to a 4-6 inches round sphere (ball) and from that ball to the interior of the MH, can anyone tell me what activate that valve and what could be the problem.
thank you.[/QUOTE]

That should be the 12 volt vacuum pump for the heater controls, if that is what it is here is a company you can get one at about $100 bucks cheaper than Monaco but it probaly wont be just like what you have now.
Gast Mfg Co at 269-926-6171

__________________
Walt & Will
2000 Dynasty
2017 Ram Big Horn Crew C 4X4 w/ M&G
walt2137 is online now   Reply With Quote
Old 11-09-2009, 11:50 AM   #5
Junior Member
 
Join Date: Oct 2009
Posts: 11
this one is a valve not a pump, it as one red plastic air line coming from under the MH, one line going to ball, one line sort of coming out and going back in the valve.

where should be the vaccum pump and does it look like.

thank you.
Marcel
access is offline   Reply With Quote
Old 11-09-2009, 06:17 PM   #6
Senior Member
 
walt2137's Avatar
 
Monaco Owners Club
Join Date: Sep 2003
Location: Quitman MS
Posts: 2,954
Then it is a air operated vacuum pump.
__________________
Walt & Will
2000 Dynasty
2017 Ram Big Horn Crew C 4X4 w/ M&G
walt2137 is online now   Reply With Quote
Old 11-09-2009, 09:13 PM   #7
Junior Member
 
Join Date: Oct 2009
Posts: 11
found the problem: air/vacuum connector at heater control was off, plugged it back in - the air leak was gone.
thank you.
Marcel
access is offline   Reply With Quote
Old 11-10-2009, 01:16 AM   #8
Moderator Emeritus


 
Monaco Owners Club
Excel Owners Club
Join Date: Nov 2006
Location: Hangin' with Sacs and the Pins
Posts: 9,413
access- I am glad you were able to track down your problem! It also looks like you found a wiring diagram too!! Isn't this forum great!!



__________________
MM
*MonacoMama with the 2 Pins & SacsTC Nearby*
*2007 Monaco Diplomat 40' SFT<>2006 Chevy VortecMax Toad<>2006 Buick Lucerne Leading the Way*
MonacoMama is offline   Reply With Quote
Old 11-13-2009, 09:15 PM   #9
Junior Member
 
Join Date: Oct 2009
Posts: 11
yes I think it is great. how do edit your signature on a post.
thank you
marcel
access is offline   Reply With Quote
Old 11-13-2009, 09:54 PM   #10
Moderator Emeritus


 
Monaco Owners Club
Excel Owners Club
Join Date: Nov 2006
Location: Hangin' with Sacs and the Pins
Posts: 9,413
Quote:
Originally Posted by access View Post
yes I think it is great. how do edit your signature on a post.
thank you
marcel
You can change various settings in your member account. To access your account, click "user CP" on the upper navbar.

From the left side menu in your user control panel, you can add a signature, upload an avatar (the picture beside a post), change your account information and your forum interface. After any change, be sure to scroll to the bottom of the page and click 'save'.

I hope this helps!



__________________

__________________
MM
*MonacoMama with the 2 Pins & SacsTC Nearby*
*2007 Monaco Diplomat 40' SFT<>2006 Chevy VortecMax Toad<>2006 Buick Lucerne Leading the Way*
MonacoMama is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiring diagram from Monaco Parts Dept GoneFishin Monaco Owner's Forum 149 11-09-2018 04:45 PM
Monaco trailer wiring and brake controller csp Toads and Motorhome Related Towing 3 10-14-2009 08:27 PM
Need wiring diagram paidloafer Freightliner Motorhome Chassis Forum 3 06-12-2009 05:49 PM
Monaco Knight Wiring Diagram onebeemer43 Monaco Owner's Forum 7 06-02-2009 08:24 AM
New Monaco Dynasty 43 Queen IV special ordered and received. Radarr Monaco Owner's Forum 8 07-18-2006 02:39 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:28 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.