Tow vehicle for winslow 28 rlw

[CODYBULLDOG]

I have a 2007 gmc 2500 hd four wheel drive long bed regular cab with a 6.0 gas motor , auto trans. Can i get some answers if i can tow the winslow 28 with this vehicle most of my pulling will be local flat towing with an occasional trip from ny to down south. Any help would be appreciated. Thanks.


Al
gr8toys@aol.com

[TXiceman]

You need to figure the hitch weight for the trailer will be about 20% of the trailer GVWR.

Get your truck weighed in travel trim and add the estimated hitch weight to this. Your total needs to be less than the GVWR of the truck (and also the rear axle weight of the laoded truck plus the hitch weight under the GAWR of the truck).

Excels are not light weight trailers.

Ken

[Still Working "NOT"]

Depending on you rear end which I would want 4:10's. You should be fine. I use to tow a 30RGE with a '93 F250, 460ci and 4:10 rear end.