' 07 Damon DayBreak driver's side stripe deterioration.

[KC1BUD]

Well when washing my motorhome this week we noticed that around the city water hookup that the soap suds were turning pink. The burgundy stripe around the City connection has dark streaks of ?mold? and the color is fading.

Of course, we called Damon. They of course said that it was too bad becasue it is out of warranty. They gave me the number for Graphix Unlimited, the makers of the graphics. I talked to a lovely gal there named Kam and she said it shouldn't have happened and that they would send new graphics for free.
We have an extended warranty but since it has a 100 dollar deductable we will likely have to pay to get them applied because I was told that it would be likely less than 100 dollars to get it applied. If that is all I am out and it is done right I will be happy.

[indian654321]

We also have a 2007 damon that the decals are cracking on . The front and sides of the decals on the motorhome started cracking about 6 months ago. KaM at the graphics unlimiteed sent all new decals to us . We will have to pay half the labor for installing them . Our price is $ 440. 00. Damon is suppose to pay the other half . Have you had any windshield leak issues? We have had leaking windshied since day one . We think they finally fixed it this time . Damon was going to put new cap on if they could not get it fixed. Good luck, with your decals . Keep your eye out for cracking and pulling away .

[KC1BUD]

Quote:

Originally Posted by indian654321 We also have a 2007 damon that the decals are cracking on . The front and sides of the decals on the motorhome started cracking about 6 months ago. KaM at the graphics unlimiteed sent all new decals to us . We will have to pay half the labor for installing them . Our price is $ 440. 00. Damon is suppose to pay the other half . Have you had any windshield leak issues? We have had leaking windshied since day one . We think they finally fixed it this time . Damon was going to put new cap on if they could not get it fixed. Good luck, with your decals . Keep your eye out for cracking and pulling away .

So far the only problem is around the water fill, all the other stripes are in new condition. We had them put on the Teflon coating that is supposed to protect the finnish and make waxing obsolete. I have had no problems with the windshield leaking, but I have had a couple of studs pop off the dash one on the instrument cluster and one on the heater controls. I used super glue on the one on the heater controls but I roughed up the back and drilled a couple of holes in it to increase the surface area and give the glue more to hang on to. For the other one I bought a glue made by thread locker that is supposed to hold in heat and cold and vibration, so I will see if it works.