'07 DayBreak leveler fuse.

[KC1BUD]

I have lost power to the leveler control panel. All fuses, that I can find, check ok. I am limited in the ability to crawl around like I used to. Too bad I can't get a full wiring schematic to see where each wire goes. Anyone got any ideas?

[Redapple]

I have an 06. I will see if I can find it on mine, and let you know.

Bill

[KC1BUD]

Quote:

Originally Posted by Redapple I have an 06. I will see if I can find it on mine, and let you know. Bill

Thanks Bill, the company told me to check for the fuse under the hood on the driver's side. I checked all the fuses in that location, both with a meter and a probe light they all checked fine. Is it possible that some how I disconnected it while taking out my old back-up camera and putting in the new, are any wires common between the two systems?

[Mafiaman]

there is a circuit breaker (paddle type) attached to the frame, Open the hood and it is down on the left. Search my old posts, I posted a picture of it.

[Mafiaman]

Here it is
Circuit Breaker on Lippert Levelers

[KC1BUD]

Quote:

Originally Posted by Mafiaman Here it is Circuit Breaker on Lippert Levelers

Thanks but these breakers are for the pump and so forth. I am looking for where the control pad gets it's power. I did check the breakers and they are OK.

My '07 was actually built in June of '06, really early in production. I believe it was used as a model to showcase the '07s. I bought it at a Daymon days sale and it was the factory model at the sale.