2007 Damon Tuscany 4076:

[Terbeau]

Can anyone tell me if the coach brake/turn lights are " combined" or "separate"? The coach is new to us and stored 8 hours away and I'm wiring our tow'd and I can't find anywhere in the docs that indicate how it's wired. Thanks in advance.


Sent from my iPhone using iRV2 - RV Forum

[Mac99]

I have an 08 4076. When I wired I simply made sure
the 7 pin connection was wired according to schematic
for brake and turn. Here is info from Freightliner.

[Dadfeisty]

Also the trailer wiring has isolatining relays and fuses in the electrical compartment up at top. Wiring is very straight forward and the wiring for a trailer brake is under dash on left side.

[markmiiler]

we have a 08 4072 and the turn signal lites and the brake lites are separate.

[Terbeau]

Thanks for he replies.
Yes, I did discover that the coach lights were separate but I also discovered that the wiring at the 7 pin connector at the rear of he coach had the brake/turn signals combined. Not even wanting to tear into the coach wiring to get separate wires for the lights, I used a magic box from the wiring kit I bought. It takes the combined right turn/brake wire and the left turn/brake wire in one side of he box and out the other side comes right turn, left turn, and brake signals. Very easy to wire to the Toad's wiring using some big diodes. All the lights come on when they are supposed to. That is a successful install.

[powerboatr]

over in the a/c power cord compartment there is an ARRENS box it is the brake lights and trailer lights module.
My 08 tuscany the brake and turn are wired separate through the module