 |
Center Brake Light, Phony / good intentions?
04-08-2010, 09:13 PM
|
#1
|
|
Senior Member
Workhorse Chassis Owner Damon Owners Club
Join Date: May 2005
Location: Parker, CO
Posts: 2,679
|
It's too late to make Damon fix it ,for me because my Daybreak is now 5 years old.
I've always checked my brake lights with the 4 way flashers and at night with the rear view camera. With my electrical issues lately I decided to check them with someone holding the brake pedal. The center one did not work. I took it off to change the bulb and there was no bulb, no bulb socket and no wiring.
Mine might not have been the only one that Damon did'nt finish the job, so might want to check yours.
I thought about wiring it my self but I'm not sure how to do it without having also wired in to the turn signals.
Hmm, maybe that's why Damon 'blew it off' too.
__________________
Max
'05 Damon Daybreak, 3270 on '04 P-32 Workhorse
Parker, Colorado
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-12-2010, 10:20 PM
|
#3
|
|
Senior Member
Join Date: May 2006
Location: SoCal
Posts: 162
|
If it is indeed just a brake light, all you would need to do is run a jumper wire from either the left or right light to the center light, and it will work just fine. use slightly thicker wire. The load is light enough that it will not cause any type of overload on the wire, or dim either of the bulbs. That is how my GMC was wired.
Good Luck,
Bill
__________________
2006 Damon Daybreak 3272 w/F-53 @ V10
|
|
|
|
| |
|
04-13-2010, 06:42 AM
|
#4
|
|
Senior Member
Workhorse Chassis Owner Damon Owners Club
Join Date: Mar 2009
Posts: 8,078
|
Look under the rear cap.. .Though I have not had a problem with the 3rd Eye as I call it.. I have a few other lights where the socket, bulb, and all wireing falls out and I have to "go fish" to get 'em back. You may well have a bulb and socket hanging on wires between the rear cap and the rear wall of your coach over the license plate mounting and hitch receiver.
__________________
Home is where I park it!
|
|
|
|
| |
|
04-13-2010, 12:17 PM
|
#5
|
|
Senior Member
Join Date: May 2008
Posts: 456
|
I just got my 07 out of storage and had the missus watch it on the way home. We have one and it functions. If I were you I would still get a hold of Damon and explain how the socket and wiring seem to bew missing. They might say "too bad" but they may just send the hardware and instructions to fix it. It can't hurt.
__________________
|
|
|
|
| |
|
04-13-2010, 12:20 PM
|
#6
|
|
Senior Member
Join Date: May 2008
Posts: 456
|
Quote:
Originally Posted by wa8yxm
Look under the rear cap.. .Though I have not had a problem with the 3rd Eye as I call it.. I have a few other lights where the socket, bulb, and all wireing falls out and I have to "go fish" to get 'em back. You may well have a bulb and socket hanging on wires between the rear cap and the rear wall of your coach over the license plate mounting and hitch receiver.
|
Could be a south east Michigan thing, I call it a third eye too. Have since they started putting them on cars.
Did you know anyone that was in the public safety department in Berkely Michigan? Does the name Frank Truedel ring a bell?
__________________
|
|
|
|
| |
|
04-17-2010, 10:01 PM
|
#7
|
|
Junior Member
Join Date: May 2009
Posts: 25
|
if you wire it off one of the rear brake lights it will blink when the turn signal is on for that side, did this myself years ago adding a third brake light. if the wiring is not there you would have to wire it from the brake switch. my 06 daybreak third light works but you can tell that they did some fiberglass repair around it. bought mine second hand and couldnt figure what may have happened to the third light so who knows
__________________
2006 damon daybreak 3060 on a p32 chassis
|
|
|
|
| |
|
04-18-2010, 10:26 PM
|
#8
|
|
Senior Member
Damon Owners Club Freightliner Owners Club
Join Date: Mar 2006
Location: North East Texas
Posts: 2,254
|
when i read this i did a "light" check last trip and WOW
mine did not work..........
i popped the bulb out from inside the engine door and geuss what? the bulb was broken and hanging free
__________________
USN Retired, Life time member of the DAV.
driving the short bus 4056 Tuscany
I pledge allegiance to the flag of the United States of America, and to the Republic for which it stands, one nation under God, indivisible, with liberty and justice for all.
|
|
|
|
| |
|
 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

»
Recent Discussions

»
Upcoming Rallies
No events scheduled in the next 365 days.
|
»
iRV2 on facebook
|