Water system - Damon Daybreak

[hamdave]

Okay, I finally got my water system charged up, cleaned it good, drained it and filled it again and tested all sinks, tub etc.. When I connect to my house to the 'city-connection', everything runs okay, but the FWT doesn't fill. Its a '95' daybreak. Is it supposed to have a valve that can be used to fill the tank?? I have been doing it through the 'potable' port on the side which works just fine. If no one knows, it is not an serious issue though.

[hamdave]

Okay, I finally got my water system charged up, cleaned it good, drained it and filled it again and tested all sinks, tub etc.. When I connect to my house to the 'city-connection', everything runs okay, but the FWT doesn't fill. Its a '95' daybreak. Is it supposed to have a valve that can be used to fill the tank?? I have been doing it through the 'potable' port on the side which works just fine. If no one knows, it is not an serious issue though.

[Hurricaner]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Is it supposed to have a valve that can be used to fill the tank?? </div></BLOCKQUOTE> No. Read this thread.
Plumbing modification "update"(Added schematic)

Sam

[hamdave]

Thanks, that settles that question. I can see where I can modify the system to allow it to fill from the city connection, by adding a valve. I will have to think about whether its worth doing or not, right now other things to do to it first. A lot of 'toys' to add.

Thanks again