2003 Infinity Slide question

[fatmanobx]

I am in the middle of replacing the flooring in my mh. After removing the couch and dinett I found two wire coming out of the floor and going into the wall. I believe it is 120V but can't remember for sure and my meter is at work. But they both go through the floor of the slide to god knows where. I have HWH power slide and it works fine. One set of wires is not hooked up. Any input would be appreciated.

[Gary RVRoamer]

Hard to say. If you have any 120v outlets in the slide, then it could be 120v. But you likely have some 12v lights too and they have to get power and ground from somewhere.