Full wall slide and other issues
Has anyone adjusted there full wall slide? The front corner has dropped 1/4 inch and is rubbing the trim. It appears that from the factory it was adjusted to the max as the bottom two brackets bolts are at an angle. Will the top two hold the slide properly?
Need help on sewer odor while driving with the driver's window open. Always make sure the drains are wet but get the smell after awhile. Any thoughts?
Anyone modify the engine ac to vent fresh air.
After 1 1/2 years of owning a new 36fd were trying to keep up with everything that keeps braking. Next project is fixing the plywood deck the refrigerator sits on as one corner had dropped 1/2". All in all still have not found a better floor plan.
|