RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Thor Industries Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 06-28-2014, 09:46 PM   #1
Member
 
Join Date: May 2014
Posts: 57
Thor ACE 29.1 *Slide Missing Screws Causing Separation*

I was inspecting my slide today and realized that on the front end of the slide near the bottom there was some separation from the house when the slide is retracted in. Upon further inspection I realized the bottom two screws were missing. Only when the slide is retracted is there separation. When the slide is out there is no separation as evidenced in the photos. I'm not sure if this is meant to be like that. Can anyone else with an ACE confirm if they have or are missing the same screws? Thank you!
Attached Images
    
__________________

ThorEvo1029 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-11-2014, 06:54 AM   #2
Member
 
Join Date: Feb 2012
Posts: 56
I had screws missing, actually twisted off, on the bottom of dinette slide on my Challenger 37dt, these do need to be replaced. It was causing bottom trim on my slide to push out with closing. It had broken the caulking seal when I found it. Camping World repaired it under warranty.
__________________
Jimmy & Becki Cullipher, Stuttgart AR
2013 Thor Challenger 37DT 37'
2011 Jeep Wrangler on the Blue Ox
jcullipher is offline   Reply With Quote
Reply

Tags
scr, slide, thor



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Screws loose on ladder Graeagle55 Monaco Owner's Forum 6 06-13-2014 07:11 AM
2012 Thor Ace 29.1 Chassis Battery ThorEvo1029 Thor Industries Owner's Forum 5 05-22-2014 08:51 PM
Screws into fiberglass PGD iRV2.com General Discussion 5 03-25-2014 05:55 PM
Cabinet door hinge screws loose from wear....how to fix? Bad Bolt MH-General Discussions & Problems 8 03-04-2014 07:05 PM
8.1L missing backfiring gunnut Workhorse and Chevrolet Chassis Motorhome Forum 27 02-03-2014 08:43 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:16 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.