2012 ISC with DPF and DEF

[az99]

Does anyone have any personal experience with tuners for a 2012 ISC 350/1,000 that has all the pollution crap? Who makes something? It is in a Freightliner M2 truck. I would like to get rid of the DPF and the DEF if possible. Off highway use only. The DEF is a real PITA. Have plenty of reserve in the trans for a 10-15% torque increase.

Thanx

[jimcumminsw]

I think you are SOL on this since the EPA has cracked down on the manufactures of programmers for the latest engines.
See the attached link from Mad's who make’s the programmer for the 6.7L Cummins engine.

http://www.madselectronics.com/downloadfiles/Announcement_28022013.pdf

Jim W.

[RustyJC]

The EPA has also come down on Edge Products and H&S. The "delete" tuners are going the way of the dodo bird....

Rusty

[djbmsu]

As they well should !

[stuhly]

Too bad somebody doesn't come down on the EPA. They are getting a little overboard.

[az99]

Originally Posted by stuhly

Too bad somebody doesn't come down on the EPA. They are getting a little overboard.

[az99]

Originally Posted by djbmsu

As they well should !

Tell us how great they are when your buying fuel with 20% ethanol for $6.50 a gallon with constant shortages due to the refineries having to make 2,000 different blends for each area and weather condition.

[laj]

far as i'm concerned their not great At all under any conditions. adds way more cost to vehicle, lots more maint., when a sensor goes bad all kinds of fun either driving, or getting it towed to a shop, then hold on if you have to have the egr valve replace or the dpf filter manually cleaned.

no thanks, you can have all of it.