After tried start with door open ECM stucked in position, ignition on check engine, warning, stop engine flashes
Tried to reset without success
Any one who knows something about it?
Regards
Lasse
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I read your thread under monaco. If your lift pump is not working you will get a check engine light because of low fuel pressure. I would not think having the door open would cause a problem. I have mine open quite often and has never caused the engine to not start or stop running. Unless maybe I'm misunderstanding you. You can get a scangaugeD for about $150 and that will allow you to read the codes and that should help solve your problem.
[moderator edit ]