3060 Won't Shift into Gear
97 Foretravel
Allison MD3060R
My problem is similar to but not identical to Mickey's "MD3000 Not Engaging." Anyhow, start the engine and it shifts properly several times. Then, when selecting drive,it will display the 6 in the left window and sound a constant beep. Same in reverse. If I shut down for awhile, it will go into gear but display the same behavior after a couple of shifts. The shift pad indicates no error codes.
This is kind of an after the fact post as the rig is now at a local Allison repair facility. I'm just hoping to get a little information under my belt before they call me. I have been told that the speed sensor is a common problem, however, I've also been told it could be the pad or the TCM which of course are pretty pricey! Thanks.
jor
|