MD 3060 oil level check
I have a 1994 manufactured Allison MD 3060.
I have tried checking the oil level using my shift panel but get no OL response.
1. The rig was level.
2. Allison fluid temp was 180 degrees
3. The rig had been in Neutral for more than 2 minutes.
4. The engine was idling.
The dipstick showed full at hot.
Pressing the up and down arrows simultaneously only returned "d 1" which is the start of the diagnostic test.
Pressing the up and down arrows twice returned me to N N display.
This is a World Transmission.
Did some of these transmission come without the oil level at the shift pad feature?
1995 CC Magna + JGC