Receiver hitch size

[tdeperte]

Originally Posted by RonLC

This is what I use so it will stick out farther behind and have a pin hole for the adapter and for the Blue Ox.


https://www.etrailer.com/Hitch-Adapt...ese/38735.html

Reese Super Titan Adapter. This is exactly what you need. It will have a 3/4 inch pin hole for the receiver and a 5/8 inch pin hole for the tow bar shank. It is made by Reese and is a little expensive but is the only option at present with the correct pin hole sizes.

[Wayne Clamp]

3 inch

[dcgettinby]

Has anyone located a 3/4" locking hitch pin for the Renegade? I can find 3/4" pins, but so far I haven't been able to find one that locks.


I would sure like to think that one could leave $1000 plus of toad equipment hanging on the back of the Renegade without a worry in the world. Sadly, that's not the world we live in anymore (sigh!).

[HJLowell]

Originally Posted by dcgettinby

Has anyone located a 3/4" locking hitch pin for the Renegade? I can find 3/4" pins, but so far I haven't been able to find one that locks.


I would sure like to think that one could leave $1000 plus of toad equipment hanging on the back of the Renegade without a worry in the world. Sadly, that's not the world we live in anymore (sigh!).

A cresent wrench or small pipe can snap the end off the available lock ends.

If you truly need fool proof security ?
A Hardend Bolt with a lock nut is an option.

That will at least slow down the process of a no gooder.

But where do you stop ?

Choose your neighborhoods carefully

[Renegade RV]

Originally Posted by dcgettinby

Has anyone located a 3/4" locking hitch pin for the Renegade? I can find 3/4" pins, but so far I haven't been able to find one that locks.


I would sure like to think that one could leave $1000 plus of toad equipment hanging on the back of the Renegade without a worry in the world. Sadly, that's not the world we live in anymore (sigh!).

I use one from eTrailer made for a gooseneck. I tried to paste the link but it is not letting me do so. Search for item 34065041. Infiniterule 3/4 hitch lock. Fits like a glove.

[KanzKran]

https://www.etrailer.com/Hitch-Locks.../34065035.html

https://www.etrailer.com/Gooseneck-T.../34065041.html

[dcgettinby]

Thanks all. Don't know how I missed it!

[lwmcguire]

If you're leaving it on for quite awhile, 3/4 inch grade 8 bolt and jam nuts work very well

[jalewis]

I'm needing some guidance with tow bar to hitch setup too. I am looking at a Blue Ox BX7420 which has a 2-1/2" receiver with 5/8" pin hole. I'd be a little leery of putting a reducer sleeve in the 3" hitch on the Verona and using a 5/8" pin when the coach's receiver has a 3/4" hole. Anyone know of an adapter that has worked that allows for 3/4" pin for the coach hitch and 5/8" pin for the receiver?

[Renegade RV]

Originally Posted by jalewis

I'm needing some guidance with tow bar to hitch setup too. I am looking at a Blue Ox BX7420 which has a 2-1/2" receiver with 5/8" pin hole. I'd be a little leery of putting a reducer sleeve in the 3" hitch on the Verona and using a 5/8" pin when the coach's receiver has a 3/4" hole. Anyone know of an adapter that has worked that allows for 3/4" pin for the coach hitch and 5/8" pin for the receiver?

Etrailer carries one made for the Reese Supertitan hitch that takes a 3/4 “ pin and then a 5/8 pin at the reduced end.

[jalewis]

That Reese Super Titan Receiver Adapter is just what I am after, but I need one that goes from 3" down to 2-1/2". The ones I have found at etrailer.com and elsewhere so far go from 3" down to 2".