Toter help.

[crushton]

Just joined the forum and have a question I hope someone can answer. I have a 2017 Keystone Montana 3271 Legacy that has dry weight of 12600 & 16,800 lbs full. I have a 2001 Ford F350 and have had lots of work done to increase power especially through the mountains. After pouring ~ $8000 into it (rebuilt tranny, Edge computer and hydra chip, new pipes on Turbo, new Turbo wheel, etc.) it is not really that much better than it was originally. I am looking for a Class 7 or Class 8 truck to pull my RV. I found a truck on Craigslist that I am very interested in but not sure if it will have the power to travel through the west mountains and pull my RV without stress. It has the following Equipment: Cummins ISC 250 HP; Eaton Fuller RT-8709B 9-speed transmission; 10,000# Front axle; 19,000# Rear Axel; 3.07 Axle ratio; GVWR 26,000#; Air Brakes; Air system dryer. I am new to these trucks and really don't know what I should be looking for. Any help or information would be greatly appreciated. Not sure if this is how I should post this or if I am in the right area.

[petrel]

I think you may want to repost your question in the HDT forum here. You may also wish to visit the following:

Home | Heavy Haulers RV Resource Guide
Truck Conversion & Toterhome Community - Powered by vBulletin
HDT - Escapees Discussion Forum

IMHO although IRV2 is one of the best and most active forums for general RVing information and specific information on certain brands/types, the sites above may have additional information that you could find useful.

Best of luck with your purchase.