Hi, new to the forum, anyone know how to remove the support key on the front calipers of a P42 series? Truck sat for a long time and left front was dragging. I loosened it up but want to remove calipers and clean and lube everything.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hi, new to the forum, anyone know how to remove the support key on the front calipers of a P42 series? Truck sat for a long time and left front was dragging. I loosened it up but want to remove calipers and clean and lube everything.
WELCOME to iRV2.com's workhorse forum. Unfortunately, MH were not built on the P42 chassis, but that isn't to say you won't get a reply from some of our knowledgeable members. Good luck .Ed
thanks Ed, I am building this truck into my own motorhome. Does that qualify me for the forum?
You are ALWAYS welcome here, even without a MH. Good luck with your DIY project. May also want to check out the "Vintage" forum as there are quite a few projects going on there. Good luck.
for the few who looked at this post. One just has to remove the locking bolt then hammer the caliper retention key in board and the whole thing comes apart. The trick was knowing where and which way to apply the force then applying with confidence. Mission completed. I am a happy man.
Linear Mode
