1996 P30 Fuel Pump wiring issue
Hey guys a friend of mine has a 1996 P30 chassis Bounder motor home.
His fuel pump relay has burnt up one of the pins of the fuel pump relay, PIN #85 on the relay. He has replaced the fuel pump, strainer, and fuel filter, relay and relay harness.
The pump would still not turn on. I repaired a brokena wire in the engine bay that was grounding to the chassis. The pump will still not turn on, so I have hot wired the pump for the time being to a switch to make the vehicle drivable.
What I think has happened is a wire grounded out and caused the wire going to the relay to burn, does any one have a wiring diagram or any insight to this, the relay no longer burns up when we crank the engine but the pump does not turn on unless hot wired.
|