I have replaced a/c compressor, exp. valve & dryer. After jumping low pressure switch the compressor clutch will not engage so I can start ccharging system. I have checked & do have voltage at the a/c clutch wire. Is there some thing I am missing or is the new compressor at fault? Any help would be help full.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Thanks for info. I found the problem. It was the connector was not making contact on the ground side. I got a new connector from napa & every thing was fine. Still can not find any high pressure check port. I think w/h installed a service valve instead of a check port. The valve is right above the radiator on driver side. So I charged it to low pressure reading only. Seems to be working fine.