accelerator stuck---!!!

[njs42]

I guess since I started the thread and it is pretty much over I can divert a bit.

Hi Dunner---on that other matter of the jack switch, when I move the ignition to the on position the jacks stay deployed and retract when you move to start the vehicle---stairs retract also---a good plan for the simple minded or disorganized and I plead guilty on both counts on occassion. However if the wire on the parking brake is loose then the jacks do pretty much what ever they want. I know because I have on board air and it is wired to the igntion being on (I'm changing that) So when I want to air my tires when I move the ignition switch to on about half the time the jacks retract----turns out it was that pesky PB wire all the time.Seems many people have problems with that PB wire so when I get where I am going then I will look under there and see if I can get it to stay put a little better.

[Dunner]

Rig's in the hospital right now, so I can't check what happens when I go to "on", but I think they stay deployed. Not sure what happens when I release the PB and go to "on". I'll have to check the different scenarios.