Alcoa rims for W-20 chassis

SoCal Ed · 06-15-2005, 03:14 AM

Can you get Alcoa rims with the Workhorse logo for the W-20 Chassis? Can you order them from Workhorse? My friend has them on his W-22, and they look sharp. Thanks and Be Safe!!!!

SoCal Ed · 06-15-2005, 03:14 AM

Can you get Alcoa rims with the Workhorse logo for the W-20 Chassis? Can you order them from Workhorse? My friend has them on his W-22, and they look sharp. Thanks and Be Safe!!!!

DriVer · 06-15-2005, 03:45 AM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by SoCal Ed:
Can you order them from Workhorse? </div></BLOCKQUOTE>You should be able to get a set of 19.5 inch Alcoa Wheels from Alcoa Aluminum Products if they make them. Failing that you can surely get aluminum wheels from a 3rd party vendor.

If there is a 2 3/4" circular depression on the center of the hub of your new aluminum wheels, please send me a private message with your address and I will see if I can get a set of WCC logos for your wheels.

I don't believe that WCC offers the OEMs a 19.5 inch Aluminum Wheel option however I did see 22.5s on the production line.

Gregg · 06-15-2005, 05:04 AM

Driver,
Do you know where I can get Alcoas for the 22.5's ??
Workhorse or a third party ?

Gregg

suspension_engineer · 06-15-2005, 06:11 AM

Socal :

19.5" Alcoa part number is GA773400. The last digit will change to a 1 for inside only polished and a 2 for both sides polished. 0 is brushed finish both sides.

Alcoa will not sell to the public but send you to a distributor. I have purchased both 19.5 and super single 22.5" rims from :

ORRCO International
Grand Prarrie, TX
972-602-0241

They were extremely helpfull and would purchase from again.

You will also need nut (33mm) and hub covers that can be purchased from just about any tucking house.

Good Luck