Code P0342 2001 8.1L

[Dmiles]

Storing a code P0342 on my 8.1L 2001 Winnebago / Workhorse. That's the cam position sensor A bank 1 ckt Low input.

I realize the first thing to check is an intermittent or completely broken wire. I have located the sensor and I'm able to read voltage between the supply wire and ground. I would like to check it where it is supposed to go to, but tracing the wires would be next to impossible.

Anyone know where I might find a wiring diagram that would show me where to check the signal comming back from the cam position sensor? I assume it eventually ends up at the PCM, but some sort of wiring diagram would be most helpful.

Thanks.