DIY trac-bar

[tessi]

looking for the plans for the DIY trac-bar. where they hiding? thanks dave

[oemtech]

There should be a copy on the IRV2 photo section. But, I have almost 30 pages of photo's to wade thru. I also have then on my Free Photo Site under RV DIY W22 Trac Bar. But, be aware that if I had to do it all over again I would probably use a "Center Link" for a tractor... Check with Tractor Supply for the various sizes.

I will be adding this info to my Free web site in the DIY section. Some how I missed adding it.

[RocketDork]

I've also thought about doing this. I have access to a laser cutter and can get the brackets cut. I was wondering what rear end the templates you made are for. I've got a P32 chassis, but haven't crawled under the coach to find out what model of rear end I have.

Does anyone know if CAD drawings of the different rear ends are available?

[FLYTYER]

I did a search for you.

Click HERE and you should find just about all we have.

[oemtech]

I am about finished with the DIY Trac Bar Update and will update the web site asap. I still need to create a PDF document of the patterns for downloading.

[RocketDork]

I was just hoping for the easy way out. If I had CAD drawings of the different models of the rear ends, it would be easier to design the mount for the center section. There wouldn't be any trial and error fitting to do. I could just do the drawing and send it to the guy to cut.

If it doesn't rain today, I'm planning on identifying the model of rear end I have under my coach and starting the plans.