Join CruisersForum Today
Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
Old 04-14-2006, 11:24 AM   #1
Freddy is offline
Senior Member
Freddy's Avatar
Join Date: Sep 2002
Posts: 401
Anyone reprogrammed the 8.1L ECM? If so, what ECM Programmer was used?

I reprogrammed the ECM in my F350 PSD, and it increased the torque and HP somewhat, but difficult to tell without putting it on a dyno.

__________________
  Reply With Quote
   
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Old 04-14-2006, 11:24 AM   #2
Freddy is offline
Senior Member
Freddy's Avatar
Join Date: Sep 2002
Posts: 401
Anyone reprogrammed the 8.1L ECM? If so, what ECM Programmer was used?

I reprogrammed the ECM in my F350 PSD, and it increased the torque and HP somewhat, but difficult to tell without putting it on a dyno.

__________________
  Reply With Quote
   
Old 04-14-2006, 11:33 AM   #3
Brazels RV Performance is offline
Senior Member
Official iRV2 Sponsor
Join Date: Jul 2005
Location: CENTRALIA, WA
Posts: 1,396
Did you use a handheld programmer on your Ford?
__________________
Chris Leach
Brazel's RV Performance
  Reply With Quote
   
Old 04-14-2006, 01:31 PM   #4
rogueii is offline
Senior Member
rogueii's Avatar
Workhorse Chassis Owner
Join Date: Feb 2005
Location: Florida
Posts: 603
There is a whole lot of info under Ultra Power upgrade.
__________________
04 SeaBreese LX 8341 / Workhorse W-22 / GM 8.1 / Allison 5 Speed / Brazel's ULTRAPOWER Upgrade/Taylor Extreme Service PluCables/DIYCAI
06 Honda CRV4/SE/all wheel drive with Falcon II / Roadmaster 9000 Braking System
  Reply With Quote
   
Old 04-14-2006, 03:01 PM   #5
Freddy is offline
Senior Member
Freddy's Avatar
Join Date: Sep 2002
Posts: 401
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Brazels RV Performance:
Did you use a handheld programmer on your Ford? </div></BLOCKQUOTE>

Yes. It's the Hypertech Power Programmer III for the 90-93 7.3l PSD.
__________________
  Reply With Quote
   
Reply

« P32 Wide Track "NEW" front Stabilizer bar | MICE & WIRES >>>HELP !!!!!!! »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
ECM Check Coolant? Keith K Allison Transmission Forum 4 09-18-2008 05:13 PM
Engine programmer RattlenRam National RV Owner's Forum 6 09-01-2007 06:02 PM
programmer for diesel tom41 Towing and Tow Vehicles Discussion 16 06-17-2007 05:14 PM
ECM reprograming ron55 Workhorse Custom Chassis Motorhome Forum 17 05-18-2006 07:27 AM
hypertech programmer tml MH-General Discussions & Problems 2 04-02-2006 11:01 AM

» Recent Discussions
towing capacity 1997 fleetwood...
Installing Wood Laminate Flooring
Tire Pressure
Social Security Changes
battery calculations?
PacBreak exhaust break issue...
Another gluing project-need some...
First impression of RM 7710 GPS
Slide came in while...
Powerglide steering stabilizer
Independence Pass Hwy 82, near...
2008 Bounder 34G, good deal?
Displaced family
Purchasing a C Class
Download our Mobile App






1% for the Planet
» Upcoming Rallies
No events scheduled in
the next 365 days.
» iRV2 on facebook

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 12:44 PM.
Contact Us - Home - Archive - Community Rules - Terms of Service - Privacy - Top

Useful Links

Latest Threads

Contact Us

Have a suggestion on how we can improve our community? Need help or support with your account? We are here to help! Simply click the link below to contact us.
Contact Us »

About Us

iRV2 is the leading online forum community and social network for RVers. We strive to foster a kind and friendly atmosphere for our members to exchange knowledge about their motorhomes, trailers and experiences they have with traveling, repairs, buying/selling, and more...
Read More »
© Copyright 2008 - 2010 www.irv2.com All Rights Reserved
An exclusive design by: ForumSkin.com