RV Trip Planning Discussions

Go Back   iRV2 Forums > THE CHASSIS CLUB FORUMS > Workhorse and Chevrolet Chassis Motorhome Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-13-2017, 11:08 PM   #1
Registered User
 
Winnebago Owners Club
Vintage RV Owners Club
Join Date: Apr 2010
Location: Cherry Creek, BC Canada
Posts: 7,650
Front End alignment in BC

I have a 94 P30 workhorse chassis and I need a front end alignment. Preferably on Vancouver Island but the lower mainland will do too. I will replace all ball joints and tie rod ends etc but then I will need the alignment. Looking for recommendations and work assessments for places of business.
TIA.
__________________

Possum is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-13-2017, 11:18 PM   #2
Senior Member
 
Unplanned's Avatar
 
Join Date: May 2016
Location: Kamloops, BC, 60 miles from the Center of the Universe
Posts: 2,423
Why don't you go to Smith Chev? Right in Kamloops.
__________________

__________________
2008 Winnebago Adventurer 38J, W24, GP, dozens of small thirsty ponies. Retired after 40 years wrenching on trucks! 2010 Ford Ranger toad with GSXR 1100T or KLR650 in the back. Easy to spot an RVer, they always walk around with a screwdriver or wrench in one hand!
Unplanned is offline   Reply With Quote
Old 01-14-2017, 10:25 AM   #3
Registered User
 
Winnebago Owners Club
Vintage RV Owners Club
Join Date: Apr 2010
Location: Cherry Creek, BC Canada
Posts: 7,650
Quote:
Originally Posted by Unplanned View Post
Why don't you go to Smith Chev? Right in Kamloops.
Smith Chev-GMC Trucks is probably a great business in Kamloops but that adds 561 miles and two $200 ferry trips to the cost of the alignment. I am on the Island, just outside Port Alberni.
Possum is offline   Reply With Quote
Old 01-14-2017, 02:47 PM   #4
Senior Member
 
Unplanned's Avatar
 
Join Date: May 2016
Location: Kamloops, BC, 60 miles from the Center of the Universe
Posts: 2,423
Quote:
Originally Posted by Possum View Post
Smith Chev-GMC Trucks is probably a great business in Kamloops but that adds 561 miles and two $200 ferry trips to the cost of the alignment. I am on the Island, just outside Port Alberni.
Sorry, got confused with your location as Cherry Creek, 5 miles out of Kamloops??
__________________
2008 Winnebago Adventurer 38J, W24, GP, dozens of small thirsty ponies. Retired after 40 years wrenching on trucks! 2010 Ford Ranger toad with GSXR 1100T or KLR650 in the back. Easy to spot an RVer, they always walk around with a screwdriver or wrench in one hand!
Unplanned is offline   Reply With Quote
Old 01-14-2017, 02:57 PM   #5
Senior Member
 
96 Wideglide's Avatar
 
Holiday Rambler Owners Club
Join Date: Aug 2010
Posts: 3,892
I've used these guys, with a previous class A. Seem to know what they are doing, and have the proper equiptment.

Vancouver Axle & Frame | Truck Alignment & Suspension
__________________
Ben & Sharon
2008 43' Holiday Rambler Scepter PDQ
96 Wideglide is offline   Reply With Quote
Old 01-14-2017, 08:22 PM   #6
Registered User
 
Winnebago Owners Club
Vintage RV Owners Club
Join Date: Apr 2010
Location: Cherry Creek, BC Canada
Posts: 7,650
Quote:
Originally Posted by 96 Wideglide View Post
I've used these guys, with a previous class A. Seem to know what they are doing, and have the proper equiptment.

Vancouver Axle & Frame | Truck Alignment & Suspension
Thank you I just sent them a contact request.
Possum is offline   Reply With Quote
Old 01-15-2017, 11:59 AM   #7
Senior Member
 
Oemtech's Avatar
 
Join Date: Feb 2003
Location: Jarrell, TX 76537
Posts: 4,304
Send a message via AIM to Oemtech
You may what to download this P-Chassis Alignment & read/print for reference.
__________________
Dale
AKA - Oemy
Oemtech is offline   Reply With Quote
Old 01-15-2017, 12:08 PM   #8
Registered User
 
Winnebago Owners Club
Vintage RV Owners Club
Join Date: Apr 2010
Location: Cherry Creek, BC Canada
Posts: 7,650
Quote:
Originally Posted by Oemtech View Post
You may what to download this P-Chassis Alignment & read/print for reference.
Thanks for this

I did a quick scan and will print once I am on my home computer but there is a part about the rear leaf springs. My unit doesn't have those its all air back there. Am I not on a P30 chassis?

I definitely will have to print and read the whole data set. Again my thanks.
__________________

Possum is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New low end Diesel pusher vs used high end MARANATHA Newmar Owner's Forum 16 05-11-2014 03:07 PM
A High End Gas Class A or A Low End Diesel Pusher Grandcanyon Class A Motorhome Discussions 110 04-23-2014 10:22 AM
Front end and axle alighnment RL57 Spartan Motorhome Chassis Forum 9 11-24-2013 06:37 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:44 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.