Community Forums

wa7hra · 12-24-2007, 06:09 AM

I checked the Work Horse Chassis Guide to determine the correct level of oil in the front hubs of my W22. The manual says the glass "is 'mark' with full level" Apparently it shuld say "marked". Anyway, there is no full mark on the glass, only a low oil level mark.

What level should it be filled to?

Bob, wa7hra

wa7hra · 12-24-2007, 06:09 AM

I checked the Work Horse Chassis Guide to determine the correct level of oil in the front hubs of my W22. The manual says the glass "is 'mark' with full level" Apparently it shuld say "marked". Anyway, there is no full mark on the glass, only a low oil level mark.

What level should it be filled to?

Bob, wa7hra

"007" · 12-24-2007, 06:15 AM

The white circle around glass is the level mark. Oil should be just above the circle white line on bottom portion of circle.

Fred and Bonnie · 12-24-2007, 12:44 PM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by wa7hra:
I checked the Work Horse Chassis Guide to determine the correct level of oil in the front hubs of my W22. The manual says the glass "is 'mark' with full level" Apparently it shuld say "marked". Anyway, there is no full mark on the glass, only a low oil level mark.

What level should it be filled to?

Bob, wa7hra </div></BLOCKQUOTE>

Bob, you can only fill the hub so full and then the oil will run out. I am presuming you removed the small rubber plug in the center of the window? The screw-on cap if for draining.

Fred